Ningbo Xin Chang Machinery Co.,Ltd
Style: Vertical
Frequency Range: Intermediate Frequency
Electric Current: DC
Type: Seam Welders
Current: Direct Current
신청: Oil Filled Heater
이름: Automatic Seam Welding Machine
Key: Welding Machine
Transport Package: Wooden Case
Trademark: xinchang
Origin: Ningbo
생산 능력: 20 Set / Month
사용자 정의: Available
Cooling Way: Water Cooling
Control: Automatic
지원에 대한 지원: 20 Set / Month
주요 기능
오일 충전 히터용 심 용접기는 오일 히터용 생산 기계 중 하나로 주로 인버터, 용접 컨트롤러 및 중간 주파수 변압기로 구성되며 모듈형 설계를 채택하고 수입 부품으로 제작되어 자동 제어가 가능하고 전원 전압 및 주변 온도의 변화에 대해 안정적인 출력을 유지합니다.| NO. | Model Name | Material (Thickness: 0.55mm) | Dimensions/L*W*T (mm) | Weight/kg | Option (Tick "√") |
| 1 | Oil filled heater | Cold-rolled sheet SPCE | 590*145*40.3 (at the oil pocket) | 0.815 | √ |
프로세스 매개변수
| 1 | Basic Parameters | |
| 1.1 | Rated input voltage (V): | 380V/ 50Hz can be changed as per needs |
| 1.2 | Rated capacity (KVA): | ≤60 (using the intermediate inverter) |
| 1.3 | Duty cycle (%): | 100 |
| 1.4 | Secondary no-load voltage (V): | 5.6 |
| 1.5 | Secondary max. welding current (A): | ≥16,000 |
| 1.6 | Max. welding speed (seconds) excluding other auxiliary time: | 3m/min (with reference to 0.5mm low-carbon cold-rolled sheets, steel material complies with EN10130 stamping steel sheet U St grade (or no less than GB/T222 standards, with water content 0. 05~0. 12%) |
| 1.7 | Effective electrode storke (mm): | 50 |
| Max. electrode pressure (N) (0.6Mpa) |
≥7,200 | |
| 1.8 | Cooling water | Flow≥50 (L/min); |
| Water temperature (ºC): at the water inlet ≤ 25; water pressure (Mpa): 0.25-0.3 Added with the water flow detection warning system |
||
| 1.9 | Total resistance of secondary circuit (μΩ): | ≤50 |
| 1.10 | Welding range of the applicable workpieces | A=D+2*(55~90) (mm); D: 460-480 (mm)(normal); E: 55-90 (mm) ; B: 100-200 (mm) G: 60-120 (mm); C: 40-45 (mm; F: OC+12 (mm); H: 38-42 (mm) |
| 1.11 | Compressed air | 0.6Mpa, added with the compressed air warning system |
| 1.12 | Pass rate (%): | ≥99 (calculated by PCS) |
| 2 | Functional Configurations | |
| 2.1 | 1 set of profile modeling (including the mounted on the machine) | As per the drawings of oil heater provided by customer |
| 2.2 | Upper trimming knife | 1 PC |
| 2.3 | Lower trimming knife | 1 PC |
| 2.4 | Left profile modeling limit wheel | 1 PC |
| 2.5 | Round profile modeling limit wheel | 1 PC |
| 2.6 | Silver brush | 2 PCS |
| 2.7 | Copper stripe | 1 PC |
| 2.8 | Welding wheel | 2 PCS |
| 2.9 | Upper copper stripe | 1 PC |
| 2.10 | Lower copper stripe | 1 PC |
| 2.11 | Repair tools | 1 Set |
| 2.12 | Equipped with Mitsubishi touch screen and Mitsubishi PLC, Japanese SMC solenoid valve and cylinder assembly, (because the profile modeling arm rotary cylinder is our proprietary design, we can assembly the purchased spare parts, but it cannot be handled as the parts of original brand), Omron auxiliary relay, Siemens converter; | |
| 2.13 | Hands-on button control using the mobile station | |
| 3 | Mainframe Features | |
| 3.1 | With the new efficient design, the input current can be reduced by 10-30% while in normal use to reduce the production cost. It can be compatible with the automatic welding line. Party A is responsible for the installation and locating of equipment. | |
| 1 | Main Components: | ||
| NO. | Name | Brand/Place of Origin | Remark |
| 1.1 | Solenoid valve | SMC | |
| 1.2 | Regulating valve/Filter assembly/ pressure gauge | MindMan | |
| 1.3 | Air connector/Flow limit valve | AirTAC | The arm rotary cylinder part uses SMC components |
| 1.4 | PLC/Touch screen | Mitsubishi | |
| 1.5 | SCR/Diode/IGBT | Semikron or equivalent foreign brands | |
| 1.6 | Auxiliary relay | Omron or equivalent foreign brands | |
| 1.7 | Proximity switch | Autonics | |
| 1.8 | Button switch | Siemens | |
| 1.9 | Time relay | Omron | |
지금 연락